Pond levelers and flow control devices

A pond leveler is a perforated pipe run through a beaver dam, with its intake protected by a cage well upstream, so water drains out at a set level without the beavers hearing or feeling the flow. The beavers keep their pond and keep building, but the water cannot rise above the level the pipe allows. A combo device pairs a leveler with an exclusion fence at a culvert or bridge so the structure stays open. A well-designed installation typically runs for a decade with minimal maintenance.

Trusted by
City of Vancouver
District of Squamish
YVR Airport Authority
BC Ministry of Environment
City of Port Moody
Metro Vancouver
City of Kelowna
City of North Vancouver
District of North Vancouver
City of Maple Ridge
City of Pitt Meadows
Pacific Salmon Foundation
Canadian Wildlife Service
Environment Canada
Nature Conservancy of Canada
City of Nanaimo
Vancouver Endowment Lands
City of Vancouver
District of Squamish
YVR Airport Authority
BC Ministry of Environment
City of Port Moody
Metro Vancouver
City of Kelowna
City of North Vancouver
District of North Vancouver
City of Maple Ridge
City of Pitt Meadows
Pacific Salmon Foundation
Canadian Wildlife Service
Environment Canada
Nature Conservancy of Canada
City of Nanaimo
Vancouver Endowment Lands

How a pond leveler works

Beavers plug leaks they can sense. A leveler moves the intake away from the dam and spreads it across a caged, perforated section, so there is no sound or current to find. The pipe height sets the pond level. Water above that level drains through the dam continuously, so the pond can never rise past it.

Combo devices for culverts and bridges

At a culvert, beavers will dam the inlet or build inside the pipe. A combo device puts an exclusion fence around the inlet so they cannot reach it, and runs a leveler through the fence so any dam they build against it cannot raise the water. The road or rail line keeps its drainage and the beavers keep their territory.

Design matters more than the device

Most failed flow devices were undersized for the channel's peak flows, set at the wrong level, or put where beavers could still reach the intake. We size each device to the site's hydrology, set levels against what the infrastructure can tolerate, and inspect and maintain them as part of an ongoing program.

Fish passage

On salmon-bearing streams, a leveler can be paired with the Fish Lyft, our modular fish ladder developed with DFO and first deployed in Port Moody, so fish can pass a beaver dam of any height without the dam or the beavers being removed.

Common questions

Frequently asked

A properly designed and maintained installation typically runs for about a decade. Annual inspection keeps the intake clear and confirms the beavers have not found a way around it.
Dealing with this now?

Let's resolve it — permanently

Book a site assessment and get a written scope of work. Our specialists deploy across British Columbia, Alberta, Saskatchewan and Yukon.