Beaver dam removal rules in BC

In British Columbia, beaver dams are protected under the Wildlife Act, so breaching or removing one needs the right authorization unless a specific exemption covers your situation. Removing a dam is also a change in and about a stream under the Water Sustainability Act, which usually means filing a notification before the work and following its timing and conditions, and fish-bearing water adds federal Fisheries Act requirements. A small test notch to check whether beavers are active does not lower the water and is fine. For anything more, have the site assessed and the paperwork done first.

Trusted by
City of Vancouver
District of Squamish
YVR Airport Authority
BC Ministry of Environment
City of Port Moody
Metro Vancouver
City of Kelowna
City of North Vancouver
District of North Vancouver
City of Maple Ridge
City of Pitt Meadows
Pacific Salmon Foundation
Canadian Wildlife Service
Environment Canada
Nature Conservancy of Canada
City of Nanaimo
Vancouver Endowment Lands
City of Vancouver
District of Squamish
YVR Airport Authority
BC Ministry of Environment
City of Port Moody
Metro Vancouver
City of Kelowna
City of North Vancouver
District of North Vancouver
City of Maple Ridge
City of Pitt Meadows
Pacific Salmon Foundation
Canadian Wildlife Service
Environment Canada
Nature Conservancy of Canada
City of Nanaimo
Vancouver Endowment Lands

The three layers of rules

The Wildlife Act protects the dam, the lodge and the beavers themselves: disturbing or destroying a beaver dam is an offence except as the regulations allow. The Water Sustainability Act covers changes in and about a stream, and its regulation lists beaver dam removal as a change that can be made after notifying the province, subject to conditions such as timing windows. Where fish or fish habitat could be harmed downstream by a sudden release of water or sediment, the federal Fisheries Act applies too. Rules and ministries change, so confirm the current requirements before planning work.

The boot-notch test

Before deciding anything, find out whether the dam is active. Cut a notch in the top of the dam about as wide as your boot and about 2 inches deep, then check it the next morning. If it has been patched with fresh mud and sticks, beavers are working the dam. A notch that small does not drop the pond, and it is the test we use ourselves.

Why pulling the dam rarely solves it

If beavers are active, a breached or removed dam is usually rebuilt within a night or two, and a sudden release can flood or silt up land and fish habitat downstream, which becomes the liability of whoever pulled it. Removing the beavers opens the territory to new ones. That is why the lasting fixes control the water level with a pond leveler or keep a culvert open with an exclusion fence, with removal kept for sites that cannot tolerate beavers at all.

Pond levelers ↗Beaver-proof culverts ↗

Trapping and relocation

Beavers are regulated furbearers in BC, so trapping is licensed, seasonal and limited to approved methods. Relocation is not available as a conflict-management tool: current BC rules require transported conflict beavers to be euthanized. Rehabilitated orphans can only be released through specific permitted programs.

Beaver removal and relocation ↗

How we handle it

We assess the site, confirm which authorizations the work needs, file them with the dates and methods spelled out, and plan the work around fish and seasonal windows. Installing a pond leveler involves working on the dam and in the stream, so it goes into the same paperwork from the start.

Beaver control in the BC Interior ↗

Common questions

Frequently asked

Removing or breaching a beaver dam without the right authorization or a regulatory exemption is an offence under BC's Wildlife Act, and the work is also regulated as a change in and about a stream under the Water Sustainability Act.
Dealing with this now?

Let's resolve it — permanently

Book a site assessment and get a written scope of work. Our specialists deploy across British Columbia, Alberta, Saskatchewan and Yukon.