Beavers cut trees around Kelowna for food and for dam and lodge material, and cottonwood, aspen and willow are among the species they prefer. The lasting fix is two measures together: welded wire guards on the trunks you want to keep, and control of the water level so the pond stops spreading. Breaching the dam on its own does nothing to protect the trees.

Which trees do beavers cut around Kelowna?

Beavers take the trees they can eat and the trees they can build with. Cottonwood is a strong favourite. In a study of urban riverine forests, beavers foraged heavily on unprotected cottonwood, then shifted to Manitoba maple and green ash once the cottonwood was protected (England, 2019). A 2011 study of Manning Park also lists alder, willow, aspen and cottonwood as beavers' preferred food (Behind the Scenery, 2011).

TreeWhy beavers take itWhat to look for
CottonwoodStrongly preferred where unprotectedFresh chisel marks on trunks near the water
AspenPreferred food speciesGnawed stems and pointed stumps at the pond edge
WillowPreferred food, grows right at the bankStripped shoots and cut stems along the margin
Manitoba maple and green ashTaken once cottonwood is protectedNew damage after other trees are wrapped

On lakefront lots, orchards, vineyards and golf courses, watch the trees closest to the water first. Beavers forage from the water's edge, so those trees are the first within reach.

How do you protect trees from beavers?

Wrap the trunk in welded wire or hardware cloth. Don't use chicken wire. Wire mesh in various gauges and patterns is about 80% effective overall at deterring further beaver foraging, but chicken wire performs worst because it girdles trees (England, 2019).

Leave a gap between the wire and the trunk so the tree can keep growing, and check the wraps each season.

Welded wire mesh fencing secured with green posts around the base of a large mossy tree beside a water channel

Why do beavers keep cutting after you wrap a tree?

They move to what is still available. In the urban study, once cottonwood was protected, beavers turned to Manitoba maple and green ash (England, 2019).

The better approach is to walk the whole shoreline, decide which trees you want to keep, and protect that group at once. A site feeding plan, which settles what stays within reach of the pond and what gets protected, belongs in the same decision.

How do you tell if a beaver dam is active?

We cut a small test notch, about as wide as a boot and about 2 inches deep, just enough for the water to make noise. The next morning we check whether the notch has been repaired overnight. This is our method for checking activity. Breaching, removing or otherwise altering a dam can need provincial authorization, so review the BC dam removal rules before you touch the structure.

What does a water-level fix look like?

A pond leveler holds the water at a set level, so the pond stops rising into trees, roads and turf. On our Clapperton Creek project we placed pond levelers in three beaver dams in the Nicola watershed. Levelers need periodic maintenance to keep the intake clear.

What drives the scope of a beaver plan in the Okanagan?

The scope comes down to the site. The main factors are:

  • the number and species of trees to protect
  • the length of shoreline involved
  • how close the pond sits to roads, orchards, vineyards or golf course turf
  • how much snow the site receives
  • whether the dam is active

For our wider approach across the region, see our beaver control work across the BC Interior.

Sources

Common questions

Is chicken wire enough to protect a tree from beavers?

No. Chicken wire performs worst of the wire mesh options because it girdles trees. Welded wire or hardware cloth works better, with a gap left between the wire and the trunk.

How high should tree wire go?

Ask for a site assessment before fixing the height, since the right guard height depends on the site.

Do I need a permit to notch a beaver dam in BC?

Breaching, removing or otherwise altering a dam can need provincial authorization. Our test notch is a way of checking whether a dam is active, so review the BC rules page before acting on any structure.

Does Humane Solutions work in Kelowna?

Yes. We operate a base just south of Revelstoke and deploy specialists to Interior BC projects where they are needed. We are brought in for complex, high-profile and high-liability jobs that need a guaranteed professional result.